This machine uses a 2-phase AC220V50HZ power supply with a designed power of 1.5KW.

The air source used for the cylinder of this machine is filtered and dried compressed air, with a pressure range of 0.48MPa-0.8MPa. The raw material pressure is supplied by a nitrogen cylinder with stable pressure as the air source, with a pressure range of 0.015MPa-0.3MPa

For safety reasons, it is necessary to strictly follow the methods described in this manual to avoid personal injury or damage to the machine.

▶ Before plugging in the main power supply, it is necessary to confirm whether the power supply provided by the factory is consistent with the main power supply designed for the machine

▶ Before maintenance, it is necessary to confirm and ensure that the main power and gas sources are cut off,

▶ During the reset or normal operation of the machine, in case of any emergency, please immediately press the pause or emergency stop switch on the right side of the machine, and if necessary, cut off the power and gas supply.

▶ It is strictly prohibited to insert hands or other parts of the body into the interior of the machine during operation, in order to prevent the occurrence of machine crushing or collision injuries

▶ It is strictly prohibited to randomly plug or unplug internal plugs, and it is strictly prohibited to touch any sockets, connectors, or switches inside the machine.

Due to reasons such as improvements and upgrades, we were unable to notify each individual. There is a dispute between the images displayed in this manual and the actual machine. Please refer to the actual machine for accuracy.

This machine uses special mechanical components such as compressed air, pressurized nitrogen gas, cylinders, servo motors, solenoid valves, motion guides, QR code scanners, photoelectric sensors, pressure sensors, precision pressure reducing valves, etc., and is jointly controlled by industrial computers and PLCs. The formula cup is transported to the robotic arm by a conveyor belt, and then the robotic arm picks up the cup and scans the corresponding formula data through the QR code. The nozzle valve and electronic balance linear platform are controlled to move the required formula, and finally another robotic arm grabs the formula cup from the electronic scale platform back to the conveyor belt, achieving experimental research on formulas and small batch multitasking formula work of this machine.

A. After the machine is turned on or before processing a new batch of formula, it needs to be reset to zero before processing

B. Does the nitrogen pressure inside the raw material bottle meet the requirements? There are four types of nitrogen pressures: high viscosity 0.197MPa, medium viscosity 0.104MPa, medium viscosity 0.054MPa, and low viscosity 0.016MPa (actual pressure is subject to customer raw material viscosity testing)

C. Check whether the air pressure value of the equipment meets the requirements (0.48MPa-0.8MPa)

D. Is the QR code pasting position normal

E. Is the automatic processing product quantity set